Busch-Jaeger Alarm and security systems

Security begins long before an alarm sounds — it starts with how well the system is built, wired, and maintained. Busch-Jaeger alarm systems follow the same engineering logic as their electrical ranges: reliability under real conditions, clean integration with building infrastructure, and a focus on long-term serviceability.
From residential units to commercial buildings, the system provides modular protection that installers trust — stable electronics, durable housings, and predictable signaling behavior.

Busch-Jaeger Intrusion alarm systems built for precision

False alarms waste time and credibility. Busch-Jaeger intrusion alarm systems use dual-technology sensing and verified signal filtering to detect real threats — not shadows, drafts, or temperature changes.
All control lines follow standard wiring topologies, making it easy to integrate with existing cabling or KNX building automation.
The logic units handle multiple zones, with programmable delay, tamper detection, and event memory.
For installers, configuration is straightforward: each input is labeled, and the diagnostics interface reports instantly if a loop is open or shorted.

Busch-Jaeger Alarm control panels — the central intelligence

The Busch-Jaeger alarm control panel acts as the brain of the system.
Its modular architecture supports expansion for additional detectors, GSM communication, or wired/wireless integration.
The terminals are clear and accessible, allowing fast field wiring without the clutter common in low-end systems.
The enclosure is compact yet serviceable — all terminals on one plane, fuse protection integrated.
Programming can be done locally or remotely via serial or network interface, depending on configuration.

Security integrators appreciate how the control panel maintains isolation between signaling, power, and communication circuits — a small but crucial design choice that improves system stability.

Busch-Jaeger Motion detectors that understand the environment

Hallways, warehouses, offices — each space demands a different sensing pattern. Busch-Jaeger motion detectors use PIR or dual-sensor technology to differentiate between human motion and environmental interference.
The optics are precision-ground and shielded against insects and direct sunlight. Adjustable sensitivity and time delay let you tune each zone.
Ceiling or wall mount versions share the same wiring layout, making replacements or upgrades simple.
When integrated with the control panel, the detectors support alarm pre-triggers and cross-zone verification — eliminating false positives while retaining fast response.

Magnetic contacts for secure perimeters

Doors and windows are the simplest intrusion points, and Busch-Jaeger magnetic contacts handle them with mechanical precision.
The contact housings are sealed, corrosion-resistant, and tested for millions of open/close cycles.
Flush and surface-mounted versions match different door frame types; the reed switches inside maintain consistent resistance values even under vibration.
Installers often choose them for commercial entries, roller shutters, and emergency exits — anywhere where signal reliability can’t be compromised.

Busch-Jaeger Sirens and sounders with real volume

When it’s time to alert, Busch-Jaeger sirens and sounders deliver clear acoustic and visual signaling.
The piezo elements produce up to 110 dB of sound pressure, while LED strobes ensure visibility in noisy or large spaces.
Housings are UV-stabilized and sealed to IP44 or IP65, suitable for indoor or outdoor use.
Mounting brackets and terminal access are designed for fast service — a single technician can replace a unit without rewiring.
Even after years of operation, the tone remains clean and consistent, without distortion from moisture or dust ingress.

Busch-Jaeger Glass break detectors for perimeter defense

Busch-Jaeger glass break detectors monitor frequency and pressure changes caused by real glass impact, filtering out normal vibration or ambient noise.
They can be installed on window frames or ceilings, covering multiple panes with one unit.
The built-in test function allows quick verification during maintenance — no need for full acoustic testing every time.
Used in offices, banks, and showrooms, these detectors extend security coverage where physical access isn’t visible.

Busch-Jaeger Panic buttons for immediate response

In a real emergency, seconds matter. Busch-Jaeger panic buttons provide a simple, tactile trigger with mechanical reliability.
They use normally-closed contact logic to ensure alarm activation even if a cable fails.
The actuation force is deliberate — firm enough to prevent accidental triggering, light enough for quick response.
They’re available in wall, desk, or concealed mount versions, all using the same wiring standard for uniform integration.

Busch-Jaeger GSM and alarm communicators

Modern systems can’t depend solely on local sirens. Busch-Jaeger GSM/alarm communicators ensure alarm transmission even when internet or landline fails.
They support SMS, voice, or TCP/IP notifications to central monitoring stations or user-defined devices.
Dual-SIM and backup power options keep the link alive during outages.
All parameters are configurable through the main control panel — no separate setup tools required.
For building management teams, this guarantees alarm continuity under every scenario.

Alarm accessories that complete the system

Busch-Jaeger’s alarm accessories — resistors, relay modules, tamper switches, mounting boxes, and backup batteries — are designed as part of one ecosystem.
Every terminal spacing and connector type matches the core devices, so installers can assemble complete systems without searching for compatible parts.
Cable glands, protective covers, and wall mounts all use the same geometry as the rest of the Busch-Jaeger installation line, making integration seamless.

Reliability built into every component

From the sensors to the siren, every Busch-Jaeger alarm element follows industrial-grade manufacturing standards: temperature tolerance, EMC shielding, and tamper-proof enclosures.
Connectors stay firm, screw heads don’t strip, and electronics remain stable through voltage fluctuations.
It’s not just an alarm system — it’s engineered infrastructure for continuous security.

Wholesale and B2B supply

At Bank of Lamps, we provide the full Busch-Jaeger alarm systems range — control panels, motion detectors, magnetic contacts, sirens, glass break sensors, panic buttons, GSM communicators, and system accessories — available directly from our Latvia warehouse, with export across Europe.
We work with electrical contractors, system integrators, and security installers who value durable, standardized alarm components ready for large-scale or retrofit projects.
Each order includes wiring diagrams, configuration manuals, and datasheets — ready to install, test, and certify.