ARGUS Presence Master with IR, relay 2-gang, polar white

Presence detector for ceiling mounting indoors. The sensor module detects moving heat sources (e.g. people) within an adjustable area of detection and starts a staircase timer. For ohmic, inductive and capacitive loads such as incandescent lamps, energy-saving lamps, LV halogen lighting with conventional transformer, electronic transformers, fluorescent lamps. The sensor module is equipped with a light sensor with an adjustable brightness threshold so that the lighting is only switched on when a specified brightness threshold is not met. When there is sufficient natural light, the presence function allows the sensor module to switch off the lighting even when a person is present. For mounting in a size 60 flush-mounted socket or in the surface-mounted housing available as an accessory. With claw and screw fixing. With screw terminals. Functions: Switching of two outputs. External triggering via two PL-inputs (Sensor module on central unit insert (Slave), Side controller Plus). Switching. Brightness-dependent staircase lighting function with channel 1, staircase lighting function independent of brightness with channel 2. Nominal voltage: AC 220/230 V, 50/60 Hz. Nominal current: max. 10 AX, cos Phi 0.6. The total load on both channels is not allowed to exceed 14 A. Outputs: 2 x make contacts. Max. switching capacity per channel: Incandescent lamps: 2200 W. HV halogen lamps: 2000 W. LV halogen lamps with wound transformer: 500 VA. Electronic transformers: 1050 W. Capacitive load: 10 A, 140 µF. Energy-saving lamps: 100 VA. Motor load: 1000 VA. Neutral conductor: required (3 conductor system). Wire range: max. 2x2.5 mm². Angle of detection: 360°. Number of levels: 6. Number of zones: 136. Number of movement sensors: 4. Recommended installation height: 2.5 m. Range: a radius of max. 7 m (at an installation height of 2.50 m). Sensitivity: continuously adjustable. Brightness threshold: continuously adjustable between approx. 10 and 1000 lux. Overshoot time: Channel 1: continuously adjustable between approx. 10 s and approx. 30 min. Channel 2: continuously adjustable between approx. 5 min and approx. 2 h. Colour: polar white.