S-ARC1 B16 Arc fault detection device integrated with MCB
Technical Information
| Item condition | New |
| Manufacture name | S-ARC1 B16 Arc fault detection device integrated with MCB |
| Brand | ABB |
| Categories |
Miniature Circuit Breakers (MCB)
|
| Harmonized System Code | 8536 3010 00 |
| ETIM | EC002694 |
| Rated current | 16 A |
| Rated voltage | 230 V |
| Release characteristic | B |
| Number of poles | 2 |
| Rated short-circuit breaking capacity according to EN 60898 | 6 kA |
| Rated short-circuit breaking capacity according to IEC 60947-2 | 10 kA |
Packing details
| Packing level 1 | 8012542178033 |
| Packing level 2 | 8012542178033 |
| Packing level 3 | 8012542178033 |
Other Technical data
| Voltage type | AC |
| Built-in depth | 69 mm |
| Frequency | 50 Hz |
| Current limiting class | 4 |
| Over voltage category | 3 |
| Pollution degree | 2 |
| Width in number of modular spacings | 2 |
| Degree of protection (IP) | IP2X |
| Concurrently switching neutral conductor | Yes |
| Rated switch current auxiliary device | 16 A |
| Rated voltage auxiliary device | 230 V |
| Control voltage type auxiliary equipment | AC |
| Additional equipment attached at delivery | Fire protection switch |
| Construction size according to DIN 43880 | 2 |
Downloads
Description
This component is a pressure regulator designed to control and stabilize gas flow in pneumatic systems. Its primary function is to maintain consistent output pressure, even when input pressure fluctuates, ensuring system reliability and operational accuracy. ### Specifications: - Nominal working pressure range: 0–12 bar. - Maximum inlet pressure capacity: 16 bar. - Port threading standard: G1/4 (ISO). ### Materials & Build Quality: - Body material used is anodized aluminum for corrosion resistance. - Internal diaphragm constructed from nitrile rubber (NBR) for durability and compatibility with various gases. - Sealing components are PTFE-based to minimize leaks under sustained use. ### Operational Conditions: Recommended temperature range for operation is -5°C to +50°C with non-condensing humidity environments only. Designed exclusively for clean, dry air or inert gases – not rated for combustible media handling. #### Technical Notes / Limitations: - Cannot be used above its stated maximum inlet pressure rating; risks failure or damage. - Requires filtering input gas to at least ISO8573 class 2 contamination level. - Not suitable for aggressive chemical exposure or liquid-phase applications. - Diaphragm wear could occur faster at constant high-output pressures above 10 bar — monitor regularly.
