This component functions as a signal amplifier within electronic systems, boosting weak input signals to a level suitable for processing or transmission. It is designed specifically for RF and microwave applications, supporting stable operation across specified frequency ranges while maintaining linearity and low noise characteristics.
### Electrical Specifications
Operates on a fixed DC voltage input. Frequency range extends from 2 GHz to 6 GHz with gain of approximately 25 dB. Output power saturation occurs at +18 dBm typical, ensuring compatibility with most downstream components requiring medium-power drive levels. Input/output impedance standard: 50 Ohms for minimal mismatch losses.
### Physical Design & Thermal Considerations
Encased in a compact metal housing offering EMI shielding—dimensions: 30 mm x 20 mm x 10 mm. Connectors are SMA-type female (gold-plated). Maximum case temperature during operation: +85°C; passive heatsinking recommended if deployed near upper power limits.
- Operating voltage: +5 VDC nominal. Tolerances +/-0.3 VDC.
- Current consumption: ~120 mA under full load.
- Noise figure specified under optimal conditions is <1 dB.
- Requires careful grounding to minimize signal interference.
- Not rated for outdoor use — non-sealed enclosure allows for moisture ingress risk.
