Technical Information
| Item condition |
New |
| Manufacture name |
Analog input 2 way |
| Brand |
EATON
|
| Categories |
Bus System Devices (KNX/Modbus)
|
| Country of origin |
CZ |
| Harmonized System Code |
8541 4900 00
|
| Bus system KNX |
No |
| Bus system radio frequent |
Yes |
| Bus system Powernet |
No |
| With bus connection |
Yes |
| Other bus systems |
xComfort |
| Bus system LON |
No |
| Bus system KNX radio |
No |
Packing details
| Packing level 1 |
4015081117987 |
| Packing level 2 |
9008790091148 |
Other Technical data
| Mounting method |
Other |
| Model |
Base module |
| Number of inputs |
2 |
| Input current drive |
Yes |
| Input voltage drive |
Yes |
| Width in number of modular spacings |
2 |
| Degree of protection (IP) |
IP20 |
| With LED indication |
Yes |
| Min. depth of built-in installation box |
0 mm |
Description
The 2-fold analog inputs can record different measurement values (e.g.: air quality, humidity, wind direction, etc.) using universal sensors (0-10VDC, 0-20mA, 4-20mA) or the temperature (PT1000 sensor, 265643) and provide the comfortable electrical installation. The supply is carried out via a separate 24VDC power supply unit (110772 or 110773, not included as standard!!!). The 24VDC supply is fed through 2-fold at the analog input and is therefore available for supplying the active sensors. depending on the sensors connected, the correct settings must be carried out for each channel. Notice: check the load and correct supply of the sensors!!! Notice: for the precise measurement and displaying of the values, use a reference measuring device to record the offset and adjust the zOffsetz in MFR. The device is mounted in the junction or installation box. Attention!: Does not work with xComfort Bridge