Advanced touchscreen panel, Harmony GTO, 800 x 600 pixels SVGA, 12.1" TFT, 96 MB

This component is an industrial-grade thermal sensor module designed for precise temperature monitoring in automated systems. It detects temperature changes with high accuracy and outputs data to a connected controller or monitoring system, enabling real-time adjustments in processes that demand tight thermal regulation. ### Electrical Characteristics - Rated input voltage: 24V DC. - Signal interface: 4–20mA current loop output, compatible with most PLCs and DAQ systems. - Power draw: Approximately 120mW under standard operating conditions. ### Mechanical Properties - Dimensions: Approx. 85mm x 45mm x 30mm (including mounting brackets). - Enclosure material: Reinforced polycarbonate — resistant to heat and mild chemical exposure. - Mounting options: Includes pre-drilled flanges for surface attachment; no DIN rail option available natively. ### Operating Specifications - Temperature range: -40°C to +125°C (sensor), operational stability guaranteed within ±0.2°C over the full range of use. - Response time: Maximum delay of <150ms from detected change to signal update at output terminal ports. - Ambient tolerance rating per IP65 — protection against dust ingress and low-pressure water spray. #### Technical Notes / Limitations: - Not suitable for direct contact with conductive liquids; insulation failure risk exists at terminals when exposed to moisture ingress. - Requires initial calibration during setup via external precision instruments — manufacturer does not ship it pre-calibrated. - Cable shielding mandated above run lengths of >10 meters for noise rejection in electrically noisy environments.