| Item condition | New |
| Manufacture name | AANSL.MOD. 16 I/O 2 ROW&COM |
| Brand | Schneider Electric |
| Categories |
Pre-wired Sensor/Actuator Module
|
| Country of origin | LV |
| Harmonized System Code | 8536 9095 00 |
| Rated voltage | 24 V |
| Operating voltage | 24 V |
| Max. current carrying capacity per I/O signal | 0.5 A |
| Max. current carrying capacity per socket | 1.8 A |
| Max. total current | 1.8 A |
| Number of channels per connector slot | 16 |
| Number of sensor-/actuator-slots | 1 |
| Length of the preassembled cable | 0 m |
| Cable outer diameter for cable gland | 0.09-2.5 mm |
| Number of poles sensor/actuator slots | 16 |
| Connectable conductor cross section | 0.09-2.5 mm² |
| Packing level 1 | 3389110544954 |
| Width | 125 mm |
| Height | 70 mm |
| Depth | 67 mm |
| Colour housing | Grey |
| Housing material | Plastic, metallized |
| Operating temperature | -5-60 °C |
| With potential separation | No |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Material of contact surface | Other |
| Degree of protection (IP) | IP2X |
| With LED indication | No |
| Pollution degree | 2 |
| Connection for NPN-sensors | Yes |
| Type of branches for sensor-/actuator cables | Other |
| Thread sleeves sensor/actuator slots | Other |
| Cable length configurable | Yes |
| Diameter contact female | 2.5 mm |
| Fix cable version suitable for cable guide chain | No |
| Material insulation body | Other |
| Material contact body | Other copper alloys |