Register to unlock your exclusive B2B prices and start shopping. Sign up now!
2P 40A Centre Off Changeover , Top
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
21,085 €
per pcs
EAN: 3250615510921
MPN: SFT240
Package: 1
Pallet: 1440
Estimate delivery time at our warehouse (approx.):
By request
Technical Information
| Item condition | New |
| Manufacture name | 2P 40A Centre Off Changeover , Top |
| Brand | Hager |
| Categories |
Main Switches
|
| Country of origin | PL |
| Harmonized System Code | 8536 5080 00 |
| Voltage type | AC |
| Switching function | Two-way switch |
| Rated current | 40 A |
| Rated voltage | 230 V |
| Number of poles | 2 |
| Degree of protection (IP) | IP20 |
Packing details
| Packing level 1 | 3250615510921, 3250615510921 |
| Packing level 2 | 3250615510921 |
| Packing level 3 | 3250615510921 |
Other Technical data
| With signal lamp | No |
| Built-in depth | 70 mm |
| Max. lamp power | 0 W |
| Short-circuit breaking capacity (Icw) | 0.6 kA |
| Rated switching capacity | 0.846 kA |
| Width in number of modular spacings | 2 |
| Min. rated voltage | 230 V |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as normally open contact | 0 |
| Number of contacts as change-over contact | 2 |
| Forced segregation according to DIN VDE 0113 | No |
Description
Sensor Module for Temperature and Humidity Control. Primarily operates as a monitoring device within environmental systems, delivering critical data on temperature fluctuations and relative humidity levels to enable precise climate regulation or diagnostic analysis.
**Electrical Specifications:**
- Voltage range: 3.3V - 5V (DC).
- Power consumption varies under load; expect minor surges during initial calibration cycles.
**Communication Interface:**
- Utilizes I²C protocol for real-time data transfer.
- Default address set to 0x44; adjustable via configuration register.
**Physical Build / Compatibility:**
- Compact PCB design with integrated SMD components measuring 15mm x 10mm x 5mm (HWD).
- Pin layout optimized for soldering onto prototyping boards or direct-to-wire harness setups.
**Technical Notes / Limitations:**
- Signal instability in environments above +85°C noted—derating applies beyond this threshold.
- Not resistant to high-moisture ingress when exposed continuously—additional IP-rated enclosures recommended where needed.
- Requires firmware update v1.2 or later for expanded system compatibility integrating modern controllers.