Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
Pulse-count input, 2-way |
| Marca |
EATON
|
| Categorías |
Dispositivos de bus KNX/Modbus
|
| País de origen* |
CZ |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
9028 3090 00
|
| ETIM |
EC000794
|
| Sistema de bus KNX |
No |
| Sistema de bus inalámbrico |
Sí |
| Sistema de bus Powernet |
No |
| Con comunicación por bus |
Sí |
| Otros sistemas de bus |
xComfort |
| Sistema de bus LON |
No |
| Sistema de bus inalámbrico KNX |
No |
Detalles del embalaje
| Nivel de embalaje 1 |
4015081169498 |
| Nivel de embalaje 2 |
9008790072031 |
Otros datos técnicos
| Tipo de fijación |
Otros |
| Modelo |
Módulo base |
| Número de entradas |
2 |
| Corriente de entrada del actuador |
Sí |
| Tensión de entrada del actuador |
Sí |
| Ancho en módulos |
2 |
| Grado de protección (IP) |
IP20 |
| Con indicador LED |
Sí |
| Profundidad mín. de la caja empotrada |
0 mm |
Descripción
The pulse value input 2-fold is used to set that in order to record the consumption values of, e.g., electric, gas, water, etc. via a zmeter with standardized S0 interfacez and then subsequently transfer them for evaluation and displaying to the room-manager with zenergy management functionz. The supply is carried out via a separate 24VDC power supply unit (110772 or 110773, not included as standard!!!).the 24VDC supply is fed through 2-fold at the pulse input and is therefore available for supplying the meter (if required). Notice: only use S0 sensors and observe the correct wiring!!! The device is mounted in the junction or installation box. Attention!: Does not work with xComfort Bridge . Notice: only use S0 sensors and observe the correct wiring!!! The device is mounted in the junction or installation box.