Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
Analog input 2 way |
| Marca |
EATON
|
| Categorías |
Dispositivos de bus KNX/Modbus
|
| País de origen* |
CZ |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8541 4900 00
|
| ETIM |
EC000794
|
| Sistema de bus KNX |
No |
| Sistema de bus inalámbrico |
Sí |
| Sistema de bus Powernet |
No |
| Con comunicación por bus |
Sí |
| Otros sistemas de bus |
xComfort |
| Sistema de bus LON |
No |
| Sistema de bus inalámbrico KNX |
No |
Detalles del embalaje
| Nivel de embalaje 1 |
4015081117987 |
| Nivel de embalaje 2 |
9008790091148 |
Otros datos técnicos
| Tipo de fijación |
Otros |
| Modelo |
Módulo base |
| Número de entradas |
2 |
| Corriente de entrada del actuador |
Sí |
| Tensión de entrada del actuador |
Sí |
| Ancho en módulos |
2 |
| Grado de protección (IP) |
IP20 |
| Con indicador LED |
Sí |
| Profundidad mín. de la caja empotrada |
0 mm |
Descripción
The 2-fold analog inputs can record different measurement values (e.g.: air quality, humidity, wind direction, etc.) using universal sensors (0-10VDC, 0-20mA, 4-20mA) or the temperature (PT1000 sensor, 265643) and provide the comfortable electrical installation. The supply is carried out via a separate 24VDC power supply unit (110772 or 110773, not included as standard!!!). The 24VDC supply is fed through 2-fold at the analog input and is therefore available for supplying the active sensors. depending on the sensors connected, the correct settings must be carried out for each channel. Notice: check the load and correct supply of the sensors!!! Notice: for the precise measurement and displaying of the values, use a reference measuring device to record the offset and adjust the zOffsetz in MFR. The device is mounted in the junction or installation box. Attention!: Does not work with xComfort Bridge