Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
UD/S4.315.2.1 LED-Dim actuator 4x315W image 1
MD99 image 2
MD01 image 3
UD/S4.315.2.1 LED-Dim actuator 4x315W image 4
UD/S4.315.2.1 LED-Dim actuator 4x315W image 5
UD/S4.315.2.1 LED-Dim actuator 4x315W thumbnail 1
MD99 thumbnail 2
MD01 thumbnail 3
UD/S4.315.2.1 LED-Dim actuator 4x315W thumbnail 4
UD/S4.315.2.1 LED-Dim actuator 4x315W thumbnail 5

UD/S4.315.2.11 LED dimmer 4 x 315 W/VA

En el almacén del proveedor
EAN: 4011395251966
MPN: 2CKA006197A0057
Embalaje: 1
Precio (sin IVA)
1 365,18 €
por ud.
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: Bajo petición
Precio válido hasta 31.12.27 o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante UD/S4.315.2.1 LED-Dim actuator 4x315W
Marca ABB
Categorías Dispositivos de bus KNX/Modbus
Código del Sistema Armonizado 8538 9091 00
ETIM EC001094
Tipo de fijación DRA (adaptador para carril DIN)
Modelo Actuador de regulación
Número de salidas 4
Sistema de bus KNX Sí
Sistema de bus inalámbrico Sí
Sistema de bus Powernet Sí
Otros sistemas de bus No
Entrada para mando auxiliar Sí

Detalles del embalaje

Nivel de embalaje 1 4011395251966

Otros datos técnicos

Frecuencia 50-60 Hz
Con comunicación por bus Sí
Tipo de carga Universal y retrofit LED
Tensión 230 V
Ancho en módulos 120
Sistema de bus LON Sí
Posibilidad de funcionamiento en paralelo Sí
Manejo local/manual Sí
Potencia de salida 315 W
Grado de protección (IP) IP20
Con indicador LED Sí
Apto para aumento de potencia Sí
Sistema de bus inalámbrico KNX Sí
Radio bidireccional Sí
Módulo de bus desmontable Sí
Profundidad mín. de la caja empotrada 64.5 mm
Indicador de potencia LED máx. 0 W

Descargas

Descripción

Multichannel universal dimming actuator optimised for dimming retrofit LED lamps (LEDi). Also suitable for dimming incandescent lamps, low-voltage halogen lights with conventional or electronic transformers, 230 V halogen lamps and dimmable energy-saving halogen lamps. Automatic load detection (can be deactivated). Separate N-connection per channel. Parallel connection of the outputs possible to increase the output power. Outputs can be connected in parallel in groups. Minimum load: 2 W. Manual operation on device also possible without bus voltage or in an unprogrammed status. Programming of the device also possible without applied 230V supply voltage. Extensive test and diagnosis functions for the i-Bus tool. Fast parameter setting in ETS using copyable channel templates. With integrated bus coupler. Nominal power at 230 V~ mains voltage: 230 V~ incandescent and halogen lamps: 4 x 315 W/VA to 2 x 500 W/VA in trailing edge control, 4 x 120 W/VA to 2 x 200 W/VA in leading edge control. Dimmable 230 V~ LEDi: 4 x 315 W/VA to 2 x 500 W/VA in trailing edge control, 4 x 120 W/VA to 2 x 200 W/VA in leading edge control. Inductive L-transformers with LED/low-voltage halogen lamp: 4 x 315 W/VA to 2 x 500 W/VA. Electronic C-transformers with LED/low-voltage halogen lamp: 4 x 315 W/VA to 2 x 500 W/VA. Electronic LC-transformers with LED/low-voltage halogen lamp: 4 x 120 W/VA to 2 x 200 W/VA.