Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
RF PB sens. 3-g KNX image 1

RF PB sens. 3-g KNX

Solo bajo pedido
EAN: 4010337017257
MPN: 510300
Embalaje: 1
Precio (sin IVA)
159,18 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 4-6 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante RF PB sens. 3-g KNX
Marca Gira
Categorías Dispositivos de bus KNX/Modbus
País de origen* DE
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8536 5011 00
ETIM EC000672
Sistema de bus KNX Sí
Sistema de bus inalámbrico No
Sistema de bus Powernet No
Otros sistemas de bus No
Sistema de bus LON No
Sistema de bus inalámbrico KNX Sí
Radio bidireccional No

Detalles del embalaje

Nivel de embalaje 1 4010337017257
Nivel de embalaje 2 4010337017257

Otros datos técnicos

Tipo de fijación Montaje empotrado (yeso)
Color Otros
Protección de la superficie Otros
Con pantalla No
Con sensor IR No
Con termostato ambiente No
Calidad del material Otros
Con comunicación por bus No
Material Otros
Número de teclas 3
Con protección antirrobo/antidesmontaje No
Número RAL (aproximado) 0
Con campo de rotulación No
Grado de protección (IP) IP20
Con indicador LED Sí
Transparente No
Número de puntos de conmutación 6
Profundidad mín. de la caja empotrada 0 mm

Descripción

RF pushbutton sensor, 3-gang for KNX System 55 Start-up rocker The RF pushbutton sensors for KNX transmit KNX telegrams wirelessly when the button is pressed, depending on the parameter settings when the application program is loaded. These could be e.g. telegrams for switching pressing, for dimming or blind control. It is also possible to program encoder functions (dimming encoders and scene auxiliary units). Features: Confirmation function as well as transmit and status display via two-colour LED (red green) separately for each button by 2-stage display function. Optional status display by separate 1-bit status communication objects. Transmit and confirmation display deactivatable. The pushbutton sensor can be attached to walls using screws or affixed to smooth or transparent surfaces using a mounting plate. Project planning, start-up and parameter setting are performed using ETS (version 5 or later). Battery-operated device. "Switching" function: Rocker or button function. Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no reaction). "Dimming" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (lighter - ON, darker - OFF). "Blind" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (ON, OFF, CHANGE). Time between short and long-term command can be set in the parameters. "Value transmitter" and "Scene auxiliary unit" functions: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (values 0 to 255, 0 to 100% or scene number). With scene auxiliary unit: Memory function possible. Notes : Batteries are consumables and must be replaced regularly. Please observe the regulations on the disposal of used batteries. The pushbutton sensor is supplied with a program-neutral start-up rocker. The suitable rocker set for the design line must be ordered separately. The range can be reduced when using rocker sets and or cover frames.