Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
OpDAT REGplus for 6xSC-Duplex for crimp splice holder |
| Marca |
METZ CONNECT
|
| Categorías |
Paneles de parcheo y cajas de datos
|
| País de origen* |
DE |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 7000 00
|
| ETIM |
EC001130
|
| Con carcasa |
Sí |
| Versión APC |
No |
| Con pigtails |
No |
| Apto para número de acopladores/adaptadores |
6 |
| Con placa frontal |
Sí |
| Con número de acopladores/adaptadores |
0 |
| Apto para número de insertos de módulo |
6 |
Detalles del embalaje
| Nivel de embalaje 1 |
4250184117872, 4250184117872 |
Otros datos técnicos
| Tipo de fijación |
Carril DIN (perfil omega) |
| Color |
Gris |
| Ancho |
34 mm |
| Altura |
129 mm |
| Profundidad |
129 mm |
| Tipo de conector externo |
SC-Dúplex |
| Tipo de conector interno |
SC-Dúplex |
Descripción
Splice distributor for TH35 rail, unequipped, with fiber reservoir, custom-labeled identification strips, various mounting versions on rail, splice tray with crimp splice holder for up to 12 splices / front plate can be completely removed, cable feed from top or bottom, straight or inclined, with M20 cable gland (up to 2 possible), width: 34 mm (2HP), height: 125 mm, depth: 132.5 mm (from rail, without adapters), can be equipped with SC-D adapters, feed of preassembled cables is possible, one cable gland M20 with strain relief included in the delivery, housing cover fastening by means of just one captive screw, unoccupied adapter recesses can be closed with special blank covers, blank cover 1x (860088-01), 2x (860088-02), variants: with crimp splice holder, with shrink splice holder, please note: if you use preassembled cables with ST plugs, use the unequipped version of the OpDAT REG plus. The ST-D adapters required in this case are available as accessory. Before mounting the adapters in the housing, plug the preassembled ST plugs in the adapters for reasons of space.