Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
Mains monitoring relay monitoring the rotating field, 1 CO contact 10A |
| Marca |
ELTAKO
|
| Categorías |
Relés de control de fases
|
| País de origen* |
CN |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 4900 00
|
| ETIM |
EC001441
|
| Rango de medición de tensión |
230 V |
| Relé de secuencia de fases |
Sí |
| Supervisión de desequilibrio de fases |
No |
| Tipo de conexión eléctrica |
Conexión por tornillo |
| Número de contactos normalmente cerrados |
0 |
Detalles del embalaje
| Nivel de embalaje 1 |
4010312202524, 4010312202524 |
| Nivel de embalaje 2 |
4010312202524 |
| Nivel de embalaje 3 |
4010312202524 |
Otros datos técnicos
| Ancho |
18 mm |
| Altura |
58 mm |
| Profundidad |
58 mm |
| Con bornes extraíbles |
No |
| Detección de fallo de fase |
Sí |
| Función de detección de subtensión |
Sí |
| Función de detección de sobretensión |
Sí |
| Tensión nominal de alimentación de control a AC 50 Hz |
250 V |
| Tensión nominal de alimentación de control a AC 60 Hz |
250 V |
| Retardo de desconexión máx. admisible |
8 s |
| Retardo de desconexión mín. ajustable |
0.1 s |
| Tipo de tensión de accionamiento |
AC |
| Número de contactos normalmente abiertos |
0 |
| Número de contactos conmutados |
1 |
Descargas
Descripción
1 CO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamp load 2000W. Standby loss 0.8 watt only. Modular device for DIN 60715 TH35 rail mounting. 1 module =18mm wide, 58mm deep. Designed to monitor 230V AC voltage between 1 to 3 phase conductors and neutral and to monitor the rotating field (clockwise) in the switch positions 2Ph and 3Ph. In the position rotating field only the rotating field is monitored, independent from the mains voltage. Supply voltage L1-N 180-250V/50Hz. In case of failure of L1 the relay releases immediately without delay. With the lower rotary switch on the front two operate voltages resp. dropout voltages can be set and the number of monitored phase conductors must be selected. U1: 161V dropout voltage and 185V operate voltage. U2: 196V dropout voltage and 206V operate voltage as per VDE 0100, part 718 (formerly: VDE 0108, part 1). Voltage applied signalled by LED. At wrong polarity or in case of a missing phase conductor the LED flashes rapidly. Release delay RV settable with the upper rotary switch from 0.1 to 8sec. The LED flashes slowly during the release delay time period. Operate delay 0.5sec. Maximum fusing 16A.