Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
Off-delay timer, 1 NO contact 10A |
| Marca |
ELTAKO
|
| Categorías |
Placas de identificación y cajas
|
| País de origen* |
CN |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 5080 00
|
| ETIM |
EC001669
|
| Tipo de fijación |
Montaje empotrado (yeso) |
| Función |
Retardo de activación y desactivación |
| Ancho en módulos |
0 |
| Número de interruptores |
0 |
| Tipo de tensión de alimentación |
AC |
| Tensión de alimentación |
250 V |
| 1.ª unidad de intervalo |
Minutos/horas |
| 2.ª unidad de intervalo |
Segundos/minutos |
| 1.er intervalo |
0-12 |
| 2.º intervalo |
1-12 |
| Corriente nominal de conmutación a 250 V AC |
10 A |
| Capacidad de conmutación de lámparas incandescentes |
2000 W |
| Número de contactos normalmente cerrados |
0 |
| Número de contactos normalmente abiertos |
1 |
Detalles del embalaje
| Nivel de embalaje 1 |
4010312603048, 4010312603048 |
| Nivel de embalaje 2 |
4010312603048 |
| Nivel de embalaje 3 |
4010312603048 |
Otros datos técnicos
| Altura de montaje |
18 mm |
| Tensión de control 1 |
8-230 V |
| Tipo de tensión de control 1 |
AC/DC |
| Frecuencia de la tensión de control 1 |
50 Hz |
| Capacidad de conmutación de lámpara fluorescente DUO |
1000 VA |
| Capacidad de conmutación de lámpara fluorescente con compensación en paralelo |
500 VA |
Descargas
Descripción
1 NO contact not potential free 10A/250V AC. Standby loss 0.7 watt only. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. Zero passage switching to protect contacts and consumers. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. 8 to 230V UC universal control voltage, electrically isolated from the 230V supply voltage and switching voltage. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. The top rotary switch varies the off-delay time from 1 to 12 minutes. Operating delay settable from 0 to 12 minutes with the lower rotary switch. Function: When the control contact (light switch) is closed the operating delay AV starts (if not set 0 minutes), on time-out the fan is switched on. The set release delay RV (delay time) starts when the control contact opens and if a set operating delay has elapsed. The fan switches off on time-out. This off-delay timer can be controlled by all dimmer switches EUD12 and EUD61 even in the minimum dimming position.