| Estado del artículo | Nuevo |
| Nombre del fabricante | Manual Motor Starter MS132-12 8-12A 3P |
| Marca | ABB |
| Categorías |
Guardamotores magnetotérmicos (MPCB)
|
| Código del Sistema Armonizado | 8536 2010 00 |
| ETIM | EC000074 |
| Corriente nominal permanente Iu | 12 A |
| Número de polos | 3 |
| Tensión nominal de funcionamiento | 250-690 V |
| Ajuste actual del disparo por sobrecarga | 8-12 A |
| Grado de protección (IP) | IP20 |
| Poder de corte último nominal en cortocircuito Icu a 400 V AC | 100 kA |
| Rango de ajuste del disparador instantáneo de cortocircuito | 180 A |
| Nivel de embalaje 1 | 4013614400124 |
| Nivel de embalaje 2 | 4013614409028 |
| Nivel de embalaje 3 | 4013614400124 |
| Ancho | 45 mm |
| Altura | 97.8 mm |
| Profundidad | 86.55 mm |
| Potencia nominal de funcionamiento en AC-3, 400 V | 5.5 kW |
| Con interruptor auxiliar integrado | No |
| Con disparador de mínima tensión integrado | No |
| Con protección térmica | Sí |
| Tipo de conexión eléctrica del circuito principal | Conexión por tornillo |
| Tipo de elemento de mando | Mando giratorio |
| Tecnología de desconexión | Termomagnético |
| Sensible a fallo de fase | Sí |
| Tipo de construcción del dispositivo | Aparato completo en carcasa |
The MS132-12 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 12.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.