Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
Analogue settable multifunction time relay, 1 NO contact 10A |
| Marca |
ELTAKO
|
| Categorías |
Placas de identificación y cajas
|
| País de origen* |
CN |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 4900 00
|
| ETIM |
EC001669
|
| Tipo de fijación |
Montaje en superficie (yeso) |
| Función |
Equipo multifunción |
| Tipo de excitación |
Analógico con varias funciones |
| Ancho en módulos |
0 |
| Número de interruptores |
0 |
| Tipo de tensión de alimentación |
AC/DC |
| Tensión de alimentación |
8-230 V |
| 1.ª unidad de intervalo |
Minutos/horas |
| 1.er intervalo |
1 |
| Capacidad de conmutación de lámparas incandescentes |
2000 W |
| Número de contactos normalmente cerrados |
0 |
| Número de contactos normalmente abiertos |
1 |
Detalles del embalaje
| Nivel de embalaje 1 |
4010312603055, 4010312603055 |
| Nivel de embalaje 2 |
4010312603055 |
| Nivel de embalaje 3 |
4010312603055 |
Otros datos técnicos
| Altura de montaje |
18 mm |
| Tensión de control 1 |
8-230 V |
| Tipo de tensión de control 1 |
AC/DC |
| Frecuencia de la tensión de control 1 |
50 Hz |
| Capacidad de conmutación de lámpara fluorescente DUO |
1000 VA |
| Capacidad de conmutación de lámpara fluorescente con compensación en paralelo |
500 VA |
Descargas
Descripción
1 NO contact potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamps 2000W*. Standby loss 0.02–0.4 watt only. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. With the patented Eltako Duplex technology (DX) the normally potential-free contacts can still switch in zero passage when switching 230V AC 50Hz and therefore drastically reduce wear. Simply connect the neutral conductor to the terminal (N) and L to 1(L) for this. This gives an additional standby consumption of only 0.1 watt. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. Universal control voltage input 8 to 230V UC. Supply voltage is same as the control voltage. Time settings between 0.5 seconds and 1 hour. Functions F: RV = off delay. AV = operating delay. TI = clock generator starting with impulse. IA = impulse-controlled operating delay. EW = fleeting NO contact. AW = fleeting NC contact. * The maximum load can be used from a delay time or clock cycle of 5 minutes. The maximum load is reduced for shorter times as follows: up to 2 seconds 15%, up to 2 minutes 30%, up to 5 minutes 60%.