Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
LED drivers |
| Marca |
Tridonic
|
| Categorías |
Drivers LED
|
| País de origen* |
RS |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| ETIM |
EC002710
|
| Ancho |
90 mm |
| Altura |
38 mm |
| Longitud |
150 mm |
| Tensión de salida |
0 V |
| Potencia de salida |
31.4-165 W |
| Grado de protección (IP) |
IP20 |
| Corriente de salida |
200-1050 mA |
| Sin función de regulación |
No |
Detalles del embalaje
| Nivel de embalaje 1 |
9006210803869, 9006210803869 |
| Nivel de embalaje 2 |
9006210803869 |
| Nivel de embalaje 3 |
9006210803869 |
Otros datos técnicos
| Apto para uso en exteriores |
Sí |
| Apto para tensión constante (lado primario) |
Sí |
| Regulación 0–10 V |
No |
| Regulación 1–10 V |
No |
| Regulación DALI |
Sí |
| Regulación DMX |
No |
| Regulador (integrado) |
No |
| Regulación GPRS |
No |
| Regulación LineSwitch |
No |
| Sistema de regulación específico del fabricante |
Sí |
| Regulación por modulación de la tensión de red |
No |
| Regulación por corte de fase descendente |
No |
| Regulación por corte de fase ascendente |
No |
| Regulación programable |
No |
| Regulación RF |
No |
| Regulación por corte de onda sinusoidal |
No |
| Regulación Touch-and-Dim |
No |
| Regulación Zigbee |
No |
| Regulación mediante pulsador |
No |
| Regulación DSI |
Sí |
Descripción
Dimmable built-in constant current outdoor D4i LED driver ¦ Dimming range 1 to 100 % (min. 10 mA) ¦ For luminaires of protection class I and protection class II ¦ Temperature protection as per EN 61347-2-13 C5e ¦ Output current adjustable between 200 – 1,050 mA via NFC, DALI or ready2mains Programmer ¦ Max. output power 165 W ¦ Up to 93 % efficiency ¦ Lowest power input on stand-by < 0.3 W ¦ Nominal lifetime of 100,000 h and 8 years guarantee (conditions at www.tridonic.com) ¦ Near field communication (NFC) ¦ Powered DALI-2 ¦ ready2mains (configuration via mains) ¦ U6Me2 (configuration of chronoSTEP via mains and ready2mains Programmer) ¦ Terminal blocks: 45° push terminals ¦ Adjustable output current in 1-mA-steps (NFC, DALI, ready2mains) ¦ Programmable chronoSTEP: times and levels (NFC, DALI, U6Me2) ¦ Enhanced constant light output function (eCLO) ¦ Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) ¦ Intelligent Temperature Guard (ITG) ¦ Intelligent Voltage Guard Plus (IVG+) ¦ Configurable external temperature management (ETM) ¦ Auxiliary 24 V, 3 W power supply ¦ DiiA/Zhaga connectivity extensions DT49, DT50, DT51, DT52 ¦ deviceKEY against unauthorized change of parameters ¦ Flexible configuration via companionSUITE (NFC, DALI, ready2mains™) or U6Me2 programmer ¦ Best energy savings due to low stand-by losses and high efficiency ¦ In-field programming possible after installation with NFC interface and ready2mains ¦ High overvoltage protection: up to 10 kV asymmetric (protection class I and II) ¦ Road, street and industry