Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM image 1
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM image 2
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM thumbnail 1
KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM thumbnail 2

KNX-RTC FM/PI W.BTN.INTER.4F TPM PW SYSM

Solo bajo pedido
EAN: 4042811092795
MPN: 616819
Embalaje: 1
Precio (sin IVA)
245,03 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 4-6 weeks
Precio válido hasta 24.12.26 o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante KNX-RTC FM/PI w.btn.inter.4f TPm pw SysM
Marca Merten by Schneider Electric
Categorías Dispositivos de bus KNX/Modbus
País de origen* DE
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 9032 1080 00
ETIM EC001101
Dispositivo de montaje Elemento base con cubierta central
Sistema de bus KNX Sí
Sistema de bus inalámbrico No
Sistema de bus Powernet No
Con comunicación por bus Sí
Otros sistemas de bus No
Sistema de bus LON No
Sistema de bus inalámbrico KNX No
Radio bidireccional No

Detalles del embalaje

Nivel de embalaje 1 4042811092795

Otros datos técnicos

Tipo de fijación Montaje empotrado (yeso)
Color Blanco
Protección de la superficie Sin tratar
Con pantalla No
Calidad del material Termoplástico
Número de entradas digitales 0
Material Plástico
Con protección antirrobo/antidesmontaje Sí
Ajuste manual del valor de consigna Sí
Posibilidad de funcionamiento en paralelo No
Botón de presencia Sí
Número RAL (aproximado) 9010
Grado de protección (IP) IP20
Con indicador LED Sí
Transparente No
Acabado superficial Mate
Con manejo local No
Clase de regulación de temperatura IV
Consumo de energía en modo de espera (solstandby) 0 W
Profundidad mín. de la caja empotrada 46 mm

Descripción

KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interface. For System M. The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sensor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conventional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs. With integrated bus coupler. The bus is connected using a bus connecting terminal. Functions of the room temperature control unit: Controller type: 2-step control, continuous PI control, switching PI control (PWM). Output: continuous in the range 0 to 100% or switching ON/OFF. Controller mode: Heating with one controller output. Cooling with one controller output. Heating and cooling with separate controller outputs. Heating and cooling with one controller output. 2-step heating with 2 control outputs. 2-step cooling with 2 control outputs. Operating modes: comfort, comfort extension, standby, night economy, frost/heat protection. Operation: Setpoint adjustment can be parameterised in the range with adjusting wheel. Presence push-button functions can be parameterised/switched off. Valve protection, controller disable. Push-button interface functions: Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valuator, brightness valuator). Push-button interface: up to 4 inputs, 2 of which can be used as outputs and one for connecting the remote sensor. Output voltage: 5 V (SELV). Output current: max. 0.8 mA. Max. cable length: Inputs/outputs max. 5 m, remote sensor max. 50 m. Material: thermoplastic classy matt. Colour: polar white.