Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
KMAi-F8 |
| Marca |
METZ CONNECT
|
| Categorías |
Software de red e interfaces de comunicación
|
| País de origen* |
DE |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 4900 00
|
| ETIM |
EC000310
|
| Aislamiento galvánico |
No |
| Protección contra sobrecorriente |
No |
| Bidireccional |
No |
| Potencia nominal absorbida |
19 mA |
Detalles del embalaje
| Nivel de embalaje 1 |
4250184123231 |
| Nivel de embalaje 2 |
4250184123231 |
Descripción
The analog encoder is used for manual control variable settings for example for mixing valves, valve positions, temperature values etc. The module can be controlled in two operating modes that are set by means of the three level switch (ON, OFF, AUTO) on the front. The switch position is confirmed via the two external control contacts B1 and B2. , Switch position ON, The control variable can be set with the potentiometer on the front. The output signal 0 to 20 mA is available at contact Y. The current flow at input YR is not interrupted when the switch is in position ON or OFF. , Switch position AUTO, The input current (YR) is transmitted to the control variable output Y with a tolerance of ±5 % (full scale value)., Connection by spring clamp terminal blocks (push-in), Setpoint generator, Manual control level with checkback function, LED brightness proportional to control variable