Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
RS485 bus pushbutton gateway image 1

RS485 bus pushbutton gateway

Solo bajo pedido
EAN: 4010312315088
MPN: 30014061
Embalaje: 1
Precio (sin IVA)
101,86 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 2-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante RS485 bus pushbutton gateway
Marca ELTAKO
Categorías Dispositivos de bus KNX/Modbus
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8526 9200 00
ETIM EC002466
Sistema de bus KNX No
Sistema de bus inalámbrico Sí
Otros sistemas de bus Otros
Sistema de bus inalámbrico KNX No
Radio bidireccional Sí

Detalles del embalaje

Nivel de embalaje 1 4010312315088, 4010312315088
Nivel de embalaje 2 4010312315088
Nivel de embalaje 3 4010312315088

Otros datos técnicos

Tipo de fijación DRA (adaptador para carril DIN)
Sistema de bus Powernet No
Tipo de fijación Fijación por abrazadera
Ancho en módulos 2.5
Sistema de bus LON No
Grado de protección (IP) IP20
Número de puntos de conmutación 10

Descargas

Descripción

Pushbutton gateway for FTS14 systems. Only 1.3 watt standby loss. Modular device for DIN-EN 60715 TH35 railmounting. 2,5 modules = 45mm wide, 58mm deep. To improve heat dissipation, provide a ventilation gap ½ a pitch unit wide on the left-hand side. Use the enclosed spacer DS14 for this purpose. Power supply 230V. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. Using up to 3 pushbutton gateways FTS14TG, you can feed the telegrams of up to 90 4-way bus switches B4T55E or pushbutton bus couplers FTS61BTK, FTS61BTKL and FTS61BTK/8 connected over a 2-wire bus with conventional pushbuttons connected to them. Data transfer and power supply take place ­simultaneously over 2 wires only. This avoids a mass of single pushbutton control lines. An FTS14EM device is then not required. Up to 30 B4T55E, FTS61BTK, FTS61BTKL and FTS61BTK/8 devices can be connected to an FTS14TG pushbutton gateway. A voltage of 29V DC is supplied to the connected devices over a 2-wire bus which is also used for data transfer. Please use only conventional bus or telephone lines. The 2-wire bus is electrically isolated from the Eltako RS485 bus. The permitted maximum line length is 200m. The RLC device enclosed with the FTS14TG must also be connected to the terminals BP and BN on the bus switch or pushbutton bus coupler furthest away. Pushbutton telegrams from the connected devices are transmitted by an FTS14FA device over the Eltako RS485 bus and over the Eltako building wireless system.