Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
RS485 bus energy meter data gateway image 1

RS485 bus energy meter data gateway

Solo bajo pedido
EAN: 4010312316146
MPN: 30014066
Embalaje: 1
Precio (sin IVA)
47,30 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 3-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante RS485 bus energy meter data gateway
Marca ELTAKO
Categorías Dispositivos de bus KNX/Modbus
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8526 9200 00
ETIM EC001099
Tipo de fijación DRA (adaptador para carril DIN)
Modelo Interfaz de radio específica del fabricante
Sistema de bus KNX No
Sistema de bus Powernet No
Ancho en módulos 1
Otros sistemas de bus Otros

Detalles del embalaje

Nivel de embalaje 1 4010312316146, 4010312316146
Nivel de embalaje 2 4010312316146
Nivel de embalaje 3 4010312316146

Otros datos técnicos

Tipo de tensión DC
Potencia absorbida 0.4 W
Sistema de bus inalámbrico Sí
Sistema de bus LON No
Protección contra desmontaje No
Interfaz de radio No
Interfaz IR Sí
Protocolo Otros
Dependiente del proveedor No
Actualizable No
Visualización No
Servidor web No
Tensión de funcionamiento 12 V
Grado de protección (IP) IP20
Con indicador LED No
Sistema de bus inalámbrico KNX No
Radio bidireccional Sí

Descargas

Descripción

Wireless energy meter data gateway for meters equipped with an IEC 62056-21 IR interface. 2 channels. Only 0.4 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. This energy meter data gateway can provide the data of an electronic domestic supply meter (eHZ-EDL) with IR interface according to IEC 62056-21 and SML protocol version 1 to the RS485 bus. Either for forwarding to an external computer or a Professional Smart Home controller. Regular flashing of the green LED indicates that the FSDG14 is receiving data from the meter. Active power, up to 4 meter readings and the serial number are transferred. The serial number corresponds to the last 4 bytes (hex) of the server ID printed on the meter. The telegram is sent over the wireless building service by means of the wireless antenna module FAM14. Usage data are transmitted over channel 1 and delivery data over channel 2. It is therefore essential for the FAM14 to issue a device address. If there is a change in active power or a meter reading, the appropriate telegram is sent immediately and all telegrams including the serial number are sent cyclically every 10 minutes. The PCT14 PC tool can also read out the FSDG14. Turn the rotary switch to select the following operating modes (OBIS codes according to IEC 62056-61): 1: Usage meter (1.8.0) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 2: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. 3: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 4: Usage meter (1.8.0) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. The link is made by using an AIR IR scanner. The scanner is attached by its fixing magnets to the IR output of the meter and is connected by its connecting cable to terminals Rx, GND and +12 V.

Accesorio

Solo bajo pedido
88,18 €
Cantidad mínima de pedido: 1
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias
EAN: 4010312316153
MPN: 30000970
Embalaje: 1
Tiempo de entrega a nuestro almacén: 3-4 weeks