Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
1- and 2-level wireless repeater |
| Marca |
ELTAKO
|
| Categorías |
Dispositivos de bus KNX/Modbus
|
| País de origen* |
CN |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8526 9200 00
|
| ETIM |
EC000698
|
| Tensión nominal |
230 V |
| Tipo de fijación |
Montaje empotrado (yeso) |
| Sistema de bus KNX |
No |
| Sistema de bus Powernet |
No |
| Otros sistemas de bus |
No |
| Sistema de bus LON |
No |
Detalles del embalaje
| Nivel de embalaje 1 |
4010312300251, 4010312300251 |
| Nivel de embalaje 2 |
4010312300251 |
| Nivel de embalaje 3 |
4010312300251 |
Otros datos técnicos
| Sistema de bus inalámbrico |
Sí |
| Grado de protección (IP) |
IP20 |
| Sistema de bus inalámbrico KNX |
No |
| Profundidad mín. de la caja empotrada |
33 mm |
Descargas
Descripción
1 and 2 level wireless repeaters. Only 0.7 watt standby loss. For installation. 45mm long, 45mm wide, 33mm deep. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only wireless signals from sensors are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Use the rotary switch to switch over to 2 level mode. Then the wireless signals from sensors and from another 1 level repeater are processed. A signal may therefore be received and amplified twice. The LED indicates incoming wireless signals by flashing briefly. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area.