Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
Universal dimmer switch, Power MOSFET up to 400W image 1

Universal dimmer switch, Power MOSFET up to 400W

Solo bajo pedido
EAN: 4010312109564
MPN: 61100802
Embalaje: 1
Precio (sin IVA)
48,29 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 2-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante Universal dimmer switch, Power MOSFET up to 400W
Marca ELTAKO
Categorías Interruptores
Reguladores de intensidad (dimmers)
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8536 5080 00
ETIM EC000025
Dispositivo de montaje Otros
Tipo de accionamiento Tecla de control por sensor
Tipo de carga Universal
Tensión nominal 230 V
Ancho del dispositivo 45 mm
Altura del dispositivo 45 mm
Profundidad del dispositivo 18 mm
Indicador de potencia LED máx. 400 W

Detalles del embalaje

Nivel de embalaje 1 4010312109564, 4010312109564
Nivel de embalaje 2 4010312109564
Nivel de embalaje 3 4010312109564

Otros datos técnicos

Tipo de fijación Montaje empotrado (yeso)
Color Azul
Sin halógenos Sí
Tipo de conexión Borne de tornillo
Protección de la superficie Otros
Calidad del material Termoplástico
Material Plástico
Tipo de fijación Fijación por tornillo
Memoria de nivel de iluminación Sí
Entrada para mando auxiliar No
Regulador en serie No
Utilizable con detector de movimiento No
Utilizable con pulsador inalámbrico No
Utilizable con pulsador infrarrojo No
Utilizable con detector de presencia No
Utilizable con pulsador Sí
Utilizable con interruptor horario/temporizador No
Tensión de control 230 V
Transparente No
Acabado superficial Mate
Sección del conductor 4 mm²
Compatible con IFTTT No
Regulación por corte de fase descendente Sí
Regulación por corte de fase ascendente Sí
Profundidad mín. de la caja empotrada 18 mm
Control mediante app por Bluetooth No
Potencia nominal con carga resistiva 400 W
Potencia nominal con carga inductiva 400 VA
Potencia nominal con carga capacitiva 400 VA
Compatible con Apple HomeKit No
Compatible con Google Assistant No
Compatible con Amazon Alexa No

Descargas

Descripción

Universal dimmer switch. Power MOSFET up to 400W. Automatic lamp detection. Standby loss 0.1 watt only. With adjustable minimum brightness or dimming speed. With switching operation for children's rooms and snooze function. For installation. 45mm long, 45mm wide, 18mm deep. Universal dimmer switch for lamps up to 400 watts, depending on ventilation conditions. Dimmable 230V LED lamps and dimmable energy saving lamps ESL dependent on the lamps electronics and the dimming technology. Zero passage switching with soft start and soft OFF to protect lamps. Control voltage, supply voltage and switching voltage 230V. No minimum load required. Short-time control commands switch on/off, permanent control varies the brightness to the maximum level. An interruption of control changes the direction of dimming. The setting of the brightness level is stored after switching off (Memory). In case of a power failure the switching position and the brightness level are stored. If applicable the dimmer will be switched on at the stored brightness level after the supply voltage is recovered. Automatic electronic overload protection and over-temperature switch-off. With the top rotary switch %lamp/dim speed either the dim speed can be adjusted or the minimum brightness level (completely dimmed down). The duration of soft-on and soft-off will be changed with the dimming speed. In operation, the bottom rotary switch determines, whether automatic lamp detection or special comfort positions should operate: AUTO allows the dimming of all lamp types. LC1 is a comfort position for dimmable 230V LED lamps which are not being dimmed down enough when set to AUTO (trailing phase angle) dependent on the construction and must therefore be forced to leading phase angle. LC2 and LC3 are comfort positions for dimmable 230V LED lamps like LC1, but with different dimming curves. EC1 is a comfort position for energy saving lamps which must be switched on with increased power dependent on the construction, so they will also switch on again safely in cold condition when dimmed down. EC2 is a comfort position for energy saving lamps which will not be switched on again when dimmed down dependent on the construction. Memory is switched off in this position. In positions LC1, LC2, LC3, EC1 and EC2 no inductive (wound) transformers should be used. In addition, the maximum number of dimmable LED lamps can be lower than in the AUTO position dependent on the construction. With special switching operation for children's rooms: If the light is switched on by holding down the pushbutton, it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is held down without modifying the last stored brightness level. Snooze function: With a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function. Mixing of L loads (inductive loads, e.g. wound transformers) and C loads (capacitive loads, e.g. electronic transformers) is not permitted. R loads (ohmic loads, e.g. 230V incandescent lamps and halogen lamps) may be added anytime.