Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
Universal dimmer switch, Power MOSFET up to 300W and switching-off relay image 1

Universal dimmer switch, Power MOSFET up to 300W and switching-off relay

Solo bajo pedido
EAN: 4010312108086
MPN: 21100830
Embalaje: 1
Precio (sin IVA)
60,72 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 2-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante Universal dimmer switch, Power MOSFET up to 300W and switching-off relay
Marca ELTAKO
Categorías Interruptores
Reguladores de intensidad (dimmers)
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8536 5080 00
ETIM EC000025
Dispositivo de montaje Otros
Tipo de accionamiento Tecla de control por sensor
Frecuencia 50 Hz
Tipo de carga Universal
Tensión nominal 230 V
Ancho del dispositivo 18 mm
Altura del dispositivo 58 mm
Profundidad del dispositivo 66 mm
Indicador de potencia LED máx. 300 W

Detalles del embalaje

Nivel de embalaje 1 4010312108086, 4010312108086
Nivel de embalaje 2 4010312108086
Nivel de embalaje 3 4010312108086

Otros datos técnicos

Tipo de fijación DRA (adaptador para carril DIN)
Color Azul
Sin halógenos Sí
Tipo de conexión Borne de tornillo
Protección de la superficie Otros
Calidad del material Termoplástico
Material Plástico
Tipo de fijación Otros
Memoria de nivel de iluminación Sí
Entrada para mando auxiliar No
Regulador en serie No
Utilizable con detector de movimiento No
Utilizable con pulsador inalámbrico No
Utilizable con pulsador infrarrojo No
Utilizable con detector de presencia No
Utilizable con pulsador Sí
Utilizable con interruptor horario/temporizador No
Tensión de control 8-230 V
Transparente No
Acabado superficial Mate
Sección del conductor 6 mm²
Compatible con IFTTT No
Regulación por corte de fase descendente No
Regulación por corte de fase ascendente No
Control mediante app por Bluetooth No
Potencia nominal con carga resistiva 300 W
Potencia nominal con carga inductiva 300 VA
Potencia nominal con carga capacitiva 300 VA
Compatible con Apple HomeKit No
Compatible con Google Assistant No
Compatible con Amazon Alexa No

Descargas

Descripción

Universal dimmer switch. Power MOSFET up to 300W. Automatic lamp ­detection. Standby loss 0.1 watt only. With adjustable minimum brightness and dimming speed. With switching operation for children's rooms and snooze function. Modular device for DIN EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Universal dimmer switch for lamps up to 300W, depending on ventilation conditions, dimmable 230V LED lamps and dimmable energy saving lamps (ESL) are also dependent on the lamp electronics. Zero passage switching with soft start and soft OFF to protect lamps. Supply voltage and switching voltage 230V. Short-time control commands switch on/off, permanent control varies the brightness to the maximum level. An interruption of control changes the direction of dimming. The setting of the brightness level is stored after switching off. In case of a power failure the switching position and the brightness level are stored. If applicable the dimmer will be switched on at the stored brightness level after the supply voltage is recovered. Automatic electronic overload protection and over-temperature switch-off. With integrated switching-off relay for the mains disconnection of switched circuits. The control pushbutton(s) of the room are connected via low voltage control wires to the terminals T1 and T2 of the EUD12F (field-free internal DC voltage). The permanent power supply must be connected directly to a phase conductor ahead of the mains disconnection relay FR12-230V. Due to this, the complete function remains but the leads to the lamps is disconnected by means of the switching-off relay. A glow lamp current is not permitted. The minimum brightness level (completely dimmed down) can be adjusted with the upper rotary switch %lamp, e.g. for dimmable energy saving lamps. You can dim all lamp types in automatic mode. Use the lower dimming speed rotary switch to set the dimming speed in seven steps in automatic mode. +ESL is a convenience setting for energy saving lamps which must be switched on at high voltage for design reasons so that they can also be switched back on cold in dimmed state. -ESL is a convenience setting for energy saving lamps which cannot be switched back on in dimmed state for design reasons. This is why memory is switched off in this position. No inductive (wound) transformers may be used in +ESL and -ESL settings. In addition the maximum number of dimmable energy saving lamps may be lower than in automatic mode for design reasons. With special switching operation for children's rooms: If the light is switched on by holding down the pushbutton, it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is held down without modifying the last stored brightness level. Snooze function: With a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function. Mixing of L loads (inductive loads, e.g. wound transformers) and C loads (capacitive loads, e.g. electronic transformers) is not permitted. R loads (ohmic loads, e.g. 230V incandescent lamps and halogen lamps) may be added anytime. Mixing of L loads and C loads is possible with the dimmer switch EUD12D in ­connection with capacity enhancer LUD12.