Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
Isolating relay with window contact, 1 NO contact 10A image 1

Isolating relay with window contact, 1 NO contact 10A

Solo bajo pedido
EAN: 4010312205495
MPN: 61100631
Embalaje: 1
Precio (sin IVA)
56,31 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 2-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante Isolating relay with window contact, 1 NO contact 10A
Marca ELTAKO
Categorías Mecanismos de control
Controladores de iluminación y persianas
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8536 4900 00
ETIM EC001593
Tensión nominal 230 V
Tipo de fijación Otros
Número de motores conectables 1
Entrada para mando auxiliar No

Detalles del embalaje

Nivel de embalaje 1 4010312205495, 4010312205495
Nivel de embalaje 2 4010312205495
Nivel de embalaje 3 4010312205495

Otros datos técnicos

Frecuencia 50 Hz
Entrada central Sí

Descargas

Descripción

1 NO contact not potential free 10A/250V AC. 230V LED lamps up to 100W, incandescent lamp load 2000W. With window contact. Standby loss 0.5 watt only. For installation. 45mm long, 45mm wide, 18mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Control input with internally produced low voltage 24V DC. With an isolating transformer electrically isolated from power supply and make contact (PELV). Therefore no external low voltage power supply necessary. With 2 L terminals and 2 N terminals for an easy and quick installation. Power supply 230V. The enclosed window contact consists of a Reed relay with terminals and a solenoid. The NC contact opens when the solenoid approaches closer than 25mm. The disconnection relay ETR61NP is connected to terminals T1 and T2. Power supply to the extractor only cuts in when the window is open. ETR61NP can be wired in the flush mounted socket behind the socket for the extractor. Mounting the window contact FK: Lever out the inserts at the narrow end of the housing. Wire up the Reed relay and cut out the cable entry on the housing. Affix the two housings in parallel maximum 15mm apart and also screw if necessary. In the longitudinal direction the solenoid may be twisted in any direction compared to the Reed relay.