Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
Impulse switch for installation in lighting fittings, 1 NO contact 10A image 1

Impulse switch for installation in lighting fittings, 1 NO contact 10A

Solo bajo pedido
EAN: 4010312101063
MPN: 60100055
Embalaje: 1
Precio (sin IVA)
41,47 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 4-6 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante Impulse switch for installation in lighting fittings, 1 NO contact 10A
Marca ELTAKO
Categorías Relés biestables
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8536 5080 00
ETIM EC000188
Tipo de fijación Otros
Función Otros
Tensión de control 1 12-24 V
Tipo de tensión de control 1 AC/DC
Tipo de tensión de alimentación AC
Tensión de alimentación 250 V
Corriente nominal de conmutación 10 A
Número de contactos normalmente abiertos 1

Detalles del embalaje

Nivel de embalaje 1 4010312101063, 4010312101063
Nivel de embalaje 2 4010312101063
Nivel de embalaje 3 4010312101063

Otros datos técnicos

Profundidad de montaje 28 mm
Ancho en módulos 2.22
Apto para accionamiento manual No
Carga máx. de lámparas incandescentes 500 W
Carga máx. de lámparas fluorescentes (circuito doble) 1000 VA
Número de contactos normalmente cerrados 0
Número de contactos conmutados 0

Descargas

Descripción

For installation in lighting fittings. 1 NO contact not potential free 10A/250V AC. 230V LED lamps up to 200W, incandescent lamp load up to 500W. Standby loss 1 watt only. Built-in device for installation. 85mm long, 40mm wide, 28mm deep. With integrated transformer to galvanically separate the control circuit from the switching circuit to comply with the ­requirements for safety extra low voltage (SELV) to EN 60669-2-2. As of production week 18/18, compliance is fulfilled with the safety requirements of 2x MOPP to EN 60601-1. Activation by internal voltage or external control voltage of 12 to 24V UC, control current 10mA at 24V. Continuous power supply 230V. A circuit breaker of max. 10A is required. Incandescent lamps and halogen lamps load up to 500W1) and fluorescent lamps with conventional ballast units in lead-lag circuit up to 1000VA. Fluorescent lamps with conventional ballast units parallel compensated 300VA. Temperatures at the mounting location between -20°C and +50°C. Min. command pulse duration/command pause 20/300ms. Connections on the low voltage side: 4-pole pin receptacle for STOCKO MKF 13264-6-0-404 plug, 230V connections: 6-pole terminal strip with plug-in terminals. max. conductor cross section 2.5mm2. One STOCKO plug comes with each device. 1) For lamps with 150W max.