Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
Impulse switch, 2 NO contacts 16A image 1

Impulse switch, 2 NO contacts 16A

Solo bajo pedido
EAN: 4010312107690
MPN: 21200601
Embalaje: 1
Precio (sin IVA)
45,38 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 4-6 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante Impulse switch, 2 NO contacts 16A
Marca ELTAKO
Categorías Relés biestables
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8536 5080 00
ETIM EC000188
Tipo de fijación Carril DIN
Función Interruptor electrónico
Tensión de control 1 230-8 V
Tipo de tensión de control 1 AC/DC
Tipo de tensión de alimentación AC
Tensión de alimentación 250 V
Corriente nominal de conmutación 16 A
Número de contactos normalmente abiertos 2

Detalles del embalaje

Nivel de embalaje 1 4010312107690, 4010312107690
Nivel de embalaje 2 4010312107690
Nivel de embalaje 3 4010312107690

Otros datos técnicos

Profundidad de montaje 58 mm
Ancho en módulos 1
Tensión de control 2 8-230 V
Frecuencia de la tensión de control 1 50 Hz
Frecuencia de la tensión de control 2 50 Hz
Apto para accionamiento manual No
Corriente máx. de conmutación (cos phi = 0,6) 4 A
Carga máx. de lámparas incandescentes 2000 W
Carga máx. de lámparas fluorescentes 1000 VA
Carga máx. de lámparas fluorescentes (circuito doble) 1000 VA
Carga máx. de lámparas fluorescentes (compensación en paralelo) 500 VA
Número de contactos normalmente cerrados 0
Número de contactos conmutados 0

Descargas

Descripción

2 NO contacts potential free 16A/250V AC. 230 V LED lamps up to 200W, incandescent lamp load up to 2000W. Standby loss 0.03–0.4 watt only. Central control priorities selectable. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. Local universal control voltage 8 to 230V UC. In addition control inputs 8 to 230V UC central ON and central OFF, electrically isolated from the local input. Supply voltage same as the local control voltage. Very low switching noise. Glow lamp current starting at 110V control voltage up to 50mA in positions 1 to 3 and 5 to 7 of the rotary switch. By using a bistable relay coil power loss and heating is avoided even in the on mode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. Maximum current across both contacts 16A for 230V. Contact position indication with LED. This starts blinking after 15 seconds in case of an inhibited pushbutton, not in position 4+8 of the rotary switch. With the upper rotary switch this impulse switch can be partly or completely excluded from central control: ZE+ZA = Central ON and Central OFF are active. You can select a response delay of 0, 1, 2 or 3 seconds for Central ON. ZE = Only Central ON is active. You can select a response ­delay of 0, 1, 2 or 3 seconds. ZA = Only Central OFF is active. ZE+ZA = No central control is active. The lower rotary switch sets several priorities. These determine which other control inputs are inhibited as long as onother control input is excited permanently. Furthermore, here it is decided if the switch position should be kept or not after a power failure: In positions 1 to 4 of the rotary switch the switch position remains unchanged, in positions 5 to 8 it is switched off. Incoming central commands are executed immediately after the powersupply returns. OFF = Permanent OFF, ON = Permanent ON. 1 and 5 = No priority. Also if central control inputs are excited permanently, it is possible to operate the device by pushing a local push-button. The last central command is executed. This is the setting ex factory. 2 and 6 = Priority for central ON and OFF. Local pushbuttons are temporarily inhibited. However, continuous excitation central OFF has priority over continuous excitation central ON. 3 and 7 = Priority for central ON and OFF. Local push-buttons are temporarily inhibited. However, continuous excitation central ON has priority over continuous excitation central OFF. 4 and 8 = Priority for permanently excited local push-button. In the meantime central commands are not executed. In these positions a glow lamp current is not permitted.

GTIN alternativo

Solo bajo pedido
60,36 € por ud.
Cantidad mínima de pedido: 5
Este precio es válido hasta 31.12.2026
Subtotal: 301,80 € Cantidad mínima de pedido: 5
EAN: 8012823377117
MPN: 136182300000
Embalaje: 1
Tiempo de entrega a nuestro almacén: 1-4 weeks