Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
LED dimmer switch, Power MOSFET up to 4A image 1

LED dimmer switch, Power MOSFET up to 4A

Solo bajo pedido
EAN: 4010312109502
MPN: 61100865
Embalaje: 1
Precio (sin IVA)
43,94 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 2-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante LED dimmer switch, Power MOSFET up to 4A
Marca ELTAKO
Categorías Interruptores
Reguladores de intensidad (dimmers)
País de origen* CN
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8536 5080 00
ETIM EC000025
Dispositivo de montaje Otros
Tipo de accionamiento Tecla de control por sensor
Tipo de carga Otros
Tensión nominal 8-230 V
Ancho del dispositivo 45 mm
Altura del dispositivo 45 mm
Profundidad del dispositivo 18 mm

Detalles del embalaje

Nivel de embalaje 1 4010312109502, 4010312109502
Nivel de embalaje 2 4010312109502
Nivel de embalaje 3 4010312109502

Otros datos técnicos

Tipo de fijación Montaje empotrado (yeso)
Color Azul
Sin halógenos Sí
Tipo de conexión Borne de tornillo
Protección de la superficie Otros
Calidad del material Termoplástico
Material Plástico
Tipo de fijación Fijación por tornillo
Memoria de nivel de iluminación Sí
Entrada para mando auxiliar No
Regulador en serie No
Utilizable con detector de movimiento No
Utilizable con pulsador inalámbrico No
Utilizable con pulsador infrarrojo No
Utilizable con detector de presencia No
Utilizable con pulsador Sí
Utilizable con interruptor horario/temporizador No
Tensión de control 8-230 V
Transparente No
Acabado superficial Mate
Sección del conductor 4 mm²
Compatible con IFTTT No
Regulación por corte de fase descendente No
Regulación por corte de fase ascendente No
Profundidad mín. de la caja empotrada 18 mm
Control mediante app por Bluetooth No
Compatible con Apple HomeKit No
Compatible con Google Assistant No
Compatible con Amazon Alexa No

Descargas

Descripción

Power MOSFET for LED lamps 12-36V DC up to 4A, pulse width modulation PWM. Stand-by loss 0.1 Watt only. With adjustable minimum brightness and dimming speed. With switching operation for children's rooms and snooze function. For installation. 45mm long, 45mm wide, 18mm deep. Dimmer switch for R- and LED loads up to 4A depending on ventilation conditions. Zero passage switching with soft start and soft OFF to protect lamps. Supply voltage input 12 to 36V DC, depending on the connected LED illumination. A pulse resistant switching power supply unit is necessary. Universal control voltage 8..230V UC, electrically isolated from the supply voltage. Either direction pushbuttons can be connected to arrow up/arrow down or these terminals will be bridged and a pushbutton will be connected as an universal pushbutton. With universal pushbutton: short commands switch on/off, permanent control changes the brightness to the maximum. An interruption of the control changes the dimming direction. With direction pushbutton: switching and dimming on with arrow up, turning and dimming off with arrow down. A dual pulse with arrow up effects dimming on up to the maximum brightness with the set dimming speed (dimspeed). The set brightness level will be stored when turning off (Memory). In case of power failure the switching position and the brightness level will be stored and will be switched on when supply voltage recurs. Automatic electronic overload protection and overtemperature switch off. The LED indicates an activation by a short flickering. With the top rotary switch %lamp the minimum brightness level (completely dimmed down) can be adjusted. With the lower dim speed rotary switch, the dimming speed can be set. At the same time, soft-on and soft-off is changed. With switching operation for children's rooms (universal or direction pushbutton arrow up): if the light is switched on by holding down the pushbutton it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is pressed without modifying the latest stored brightness level. Snooze function (universal or direction pushbutton arrow down): with a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function.