Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
DRIW-E16, 230 V AC |
| Marca |
METZ CONNECT
|
| Categorías |
Relés de vigilancia
Relés de seguridad para control de velocidad
|
| País de origen* |
DE |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 4900 00
|
| ETIM |
EC001448
|
| Apto para funciones de seguridad |
No |
| Función de supervisión de velocidad |
Sí |
| Función de supervisión de parada |
Sí |
| Tipo de conexión eléctrica |
Conexión por tornillo |
| Tensión nominal de alimentación de control a AC 50 Hz |
230 V |
| Tipo de tensión de accionamiento |
AC |
| Datos de entrada para evaluación |
1 canal |
| SIL según IEC 61508 |
No |
Detalles del embalaje
| Nivel de embalaje 1 |
4250184120292, 4250184120292 |
Otros datos técnicos
| Ancho |
22.5 mm |
| Altura |
60 mm |
| Profundidad |
60 mm |
| Homologado UL |
No |
| Con bornes extraíbles |
No |
| Con circuito de realimentación |
No |
| Con homologación BG-BIA |
No |
| Frecuencia nominal de funcionamiento |
2-70 Hz |
| Con homologación TÜV |
No |
Descripción
The speed and V-belt monitor is used for monitoring the rotary movement (insufficient speed) of motor and V-belt driven shafts. Inductive proximity switches are used for capturing the speed. Pulses are generated by the sensor without contact by means of driven control cams, toothed wheels, segmented discs, metal signal flags or similar. The relay is activated when the operating voltage is applied. After start-up bridging has finished, the monitoring function is started on the E1 and E2 terminals by means of the power contactor of the drive. When the drive speed falls below the switch-off speed, the relay is deactivated. The fault message of the speed or V-belt monitor is reset by means of the reset function and by switching off the operating voltage.