Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
DALI LED dimmer 16A tunable white for ceiling installation image 1

DALI LED dimmer 16A tunable white for ceiling installation

Solo bajo pedido
EAN: 4010312321478
MPN: 33000011
Embalaje: 1
Precio (sin IVA)
117,31 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 3-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante DALI LED dimmer 16A tunable white for ceiling installation
Marca ELTAKO
Categorías Interruptores
Reguladores de intensidad (dimmers)
País de origen* BG
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8542 3190 00
ETIM EC000025
Dispositivo de montaje Elemento base
Tipo de accionamiento Pulsador
Tensión nominal 12-48 V
Apto para grado de protección (IP) IP20
Ancho del dispositivo 30 mm
Altura del dispositivo 120 mm
Profundidad del dispositivo 22 mm
Indicador de potencia LED máx. 768 W

Detalles del embalaje

Nivel de embalaje 1 4010312321478, 4010312321478

Otros datos técnicos

Tipo de fijación Otros
Color Gris
Sin halógenos Sí
Tipo de conexión Borne enchufable
Protección de la superficie Sin tratar
Calidad del material Termoplástico
Material Plástico
Tipo de fijación Otros
Memoria de nivel de iluminación Sí
Entrada para mando auxiliar No
Regulador en serie No
Utilizable con detector de movimiento No
Utilizable con pulsador inalámbrico No
Utilizable con pulsador infrarrojo No
Utilizable con detector de presencia No
Utilizable con pulsador Sí
Utilizable con interruptor horario/temporizador No
Tensión de control 9.5-22.5 V
Transparente No
Acabado superficial Mate
Sección del conductor 1.5-2.5 mm²
Compatible con IFTTT No
Regulación por corte de fase descendente No
Regulación por corte de fase ascendente No
Profundidad mín. de la caja empotrada 22 mm
Control mediante app por Bluetooth No
Potencia nominal con carga resistiva 768 W
Compatible con Apple HomeKit No
Compatible con Google Assistant No
Compatible con Amazon Alexa No

Descargas

Descripción

DALI LED dimmer for separate control of brightness and colour temperature. For ceiling installation. 120x30x22mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, operating mode DT8: control brightness and colour temperature by a DALI address (Device Type 8, Colour Type Tc) operating mode Balance&Dim: activated via 2 DALI addresses, one to adjust brightness and one to set channel distribution (e.g. colour temperature). Operating mode Dim2Warm: one DALI address to dim and to change the colour temperature at the same time. SwitchDim2: operation via 2 pushbutton inputs permits control of brightness and colour temperature without DALI. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Power supply depending on type from 12V to 28V DC or 12V to 48V DC (depending on operating voltage of LED modules). Connected current 16A. The maximum connected current can be distributed to any channel. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The device has several operating modes: DT8 (as-delivered state): in this mode a DALI address (Device Type 8, Colour Type Tc) is used to control brightness and colour temperature. Alternatively, operation can also take place by one or two pushbutton inputs (SwitchDim2). SwD1: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Colour temperature. Balance&Dim: Control is by means of 2 DALI addresses (or SwitchDim2). One address is used for dimming and the other for channel distribution (i.e., e.g.: tunable white or direct/indirect lighting distribution). The Balance&Dim mode is used to adjust colour temperature without affecting brightness and vice versa. Adjustment is by means of DAKL standard commands such as Dim Up/Down. This permits all customary controls and gateways (e.g. KNX). This control option is an alternative to DT8-Tc mode. Operable via DALI or SwitchDim2: DALI address 1, SwD1: brightness. DALI address 2, SwD2: Balance. Dim2Warm: The two output channels are controlled by a DALI address or an SwD input. Channel distribution is permanently coupled to the dimming value. The smaller the dimming value, the warmer the light. DALI address 1, SwD1: Dim2Warm (Master). Press pushbutton briefly: On/Off. Press pushbutton long: Dim.