Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
DALI Phase dimmer 300W for DIN-EN 60715 TH35 rail mounting (DT4) image 1

DALI Phase dimmer 300W for DIN-EN 60715 TH35 rail mounting (DT4)

Solo bajo pedido
EAN: 4010312324073
MPN: 33000008
Embalaje: 1
Precio (sin IVA)
159,21 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 3-4 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante DALI Phase dimmer 300W for DIN-EN 60715 TH35 rail mounting (DT4)
Marca ELTAKO
Categorías Interruptores
Reguladores de intensidad (dimmers)
País de origen* BG
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8542 3190 00
ETIM EC000025
Dispositivo de montaje Elemento base
Tipo de accionamiento Otros
Tensión nominal 230 V
Apto para grado de protección (IP) IP20
Ancho del dispositivo 17.5 mm
Altura del dispositivo 98 mm
Profundidad del dispositivo 56 mm
Indicador de potencia LED máx. 300 W

Detalles del embalaje

Nivel de embalaje 1 4010312324073, 4010312324073

Otros datos técnicos

Tipo de fijación DRA (adaptador para carril DIN)
Color Gris
Sin halógenos Sí
Tipo de conexión Borne de tornillo
Protección de la superficie Sin tratar
Calidad del material Termoplástico
Material Plástico
Memoria de nivel de iluminación Sí
Entrada para mando auxiliar No
Regulador en serie No
Utilizable con detector de movimiento No
Utilizable con pulsador inalámbrico No
Utilizable con pulsador infrarrojo No
Utilizable con detector de presencia No
Utilizable con pulsador No
Utilizable con interruptor horario/temporizador No
Tensión de control 9.5-22.5 V
Transparente No
Acabado superficial Mate
Sección del conductor 0.5-2.5 mm²
Compatible con IFTTT No
Regulación por corte de fase descendente Sí
Regulación por corte de fase ascendente Sí
Control mediante app por Bluetooth No
Potencia nominal con carga resistiva 300 W
Potencia nominal con carga inductiva 300 VA
Potencia nominal con carga capacitiva 300 VA
Compatible con Apple HomeKit No
Compatible con Google Assistant No
Compatible con Amazon Alexa No

Descargas

Descripción

Phase dimmer with DALI control input for DIN top-hat rails DIN-EN 60715 TH35. 98x17,5x56mm. Protection class IP20. Suitable for dimming 230V LED retrofit luminaries using DALI Converts DALI dimming level to a voltage with leading or trailing edge. The minimum dimming level (MIN LEVEL) is adjustable via DALI. Additional operating mode as switch (conforms to DT7) as from Firmware 3.5. The module represents a bus user and is therefore addressable. Double terminals for easy looping of the DALI bus. Dimming range 0.1%-100%. Supply voltage 230V AC. Output load range 10-300W. High efficiency. Configuration via DALI Cockpit PC software. Function: The DALI PD is an interface between classic dimming technology (phase dimming) and DALI which is based on the standard for DALI Control Gear (IEC 62386-102) and Device Type 4 equipment (IEC 62386-205). The DALI PD interface converts the required dimming level into a corresponding voltage signal with leading or trailing edge. Depending on the load the universal dimmer operates as a leading or trailing edge dimmer. The operating mode can be requested over DALI (DT4). The dimming characteristic is based on a logarithmic scale as stipulated in the DALI standard. The leading or trailing edge control supplies a sinusoidal voltage with a phase-cut on the leading or trailing edge. The PHYSICAL MINLEVEL is 3%. As of Firmware version 3.5 the DALI PD is equipped with an additional operating mode. It is switchable from DT4 operating mode (phase dimming) to DT7 (switch). In this operating mode the DALI PD acts as a switch. Its behaviour in this mode corresponds to the DALI standard for DT7 devices (IEC62386-208). In this operating mode the switch characteristic is determined by comparing the virtual dim level (VDAP) with 4 switching thresholds. The virtual dim level (VDAP) corresponds to the dim level of a DALI electronic ballast with its corresponding characteristics (limited by MINLEVEL and MAXLEVEL, dimming speed limited by fade time and fade rate). There are 2 switching thresholds in each dimming direction and they are used for comparison with the virtual dim level: A threshold with the value ‘MASK’ is inactive and is not used in the comparison. Switch-on/off delays can be implemented with fading. The device is powered from the DALI bus so that there is only partial support for the SYSTEM FAILURE LEVEL. On current devices (identified by Firmware > 4.0), you can choose between 0%,100% and MASK. On older models the SYSTEM FAILURE LEVEL is fixed - the 25W variant outputs 100%. The 300W variant outputs 0%.