Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
DALI Gateway DG/S1.64.5.1 KNX 64 Devices |
| Marca |
ABB
|
| Categorías |
Dispositivos de bus KNX/Modbus
|
| Código del Sistema Armonizado |
8517 6200 00
|
| ETIM |
EC001099
|
| Tipo de fijación |
DRA (adaptador para carril DIN) |
| Sistema de bus KNX |
Sí |
| Sistema de bus Powernet |
No |
| Ancho en módulos |
4 |
| Otros sistemas de bus |
Otros |
Detalles del embalaje
| Nivel de embalaje 1 |
4016779067201 |
Otros datos técnicos
| Sistema de bus inalámbrico |
No |
| Sistema de bus LON |
No |
| Grado de protección (IP) |
IP20 |
| Con indicador LED |
Sí |
| Sistema de bus inalámbrico KNX |
No |
| Radio bidireccional |
No |
Descargas
Descripción
Single-Master DALI Controller certificated acc. to DALI-2 (EN 62386). The device is used to control DALI or DALI-2 devices via ABB i-bus® KNX. Two DALI output for up to 64 DALI participants. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI participants (64), with lighting groups (16), together in broadcast or per scenes (16). DALI devices type DT1 (Self-contained emergency converter acc. EN 62386-202) and type DT8 (colour temperature Tc & RGB(W) acc. EN 62386-209) will be supported. Other DALI devices e.g., DT6 can be controlled via standard DALI commands acc. to EN 62386-102.
Extensive fault and error messages are available. Slave-, staircase-, force-, block- and scene-function are integrated. Colour can set and dim, HSV(W)-, Dim2Warm-, HCL-function, 4 sequencer per DALI output can be used. A standby switch-off in combination with a KNX switch actuator (e.g., SA/S) and the integration of the DALI Gateways into a load control system are possible. By means of KNX and DT1 converter different emergency tests (e.g., function and duration test) can be triggered, test results are transferred back to KNX.
For diagnostic use and individual change of the DALI address or group assignment a separate software tool (ABB i-bus® Tool) is available.