Regístrese para desbloquear sus precios B2B exclusivos y empezar a comprar. ¡Regístrese ahora!
ctrl.unit 1 - 10 V 4-g man.act. KNX image 1

ctrl.unit 1 - 10 V 4-g man.act. KNX

Solo bajo pedido
EAN: 4010337018858
MPN: 222400
Embalaje: 1
Precio (sin IVA)
309,32 €
por unidad
Cantidad mínima de pedido: 1
Tiempo de entrega a nuestro almacén: 4-6 weeks
Este precio es válido hasta la siguiente lista de precios o hasta agotar existencias

Información técnica

Estado del artículo Nuevo
Nombre del fabricante ctrl.unit 1 - 10 V 4-g man.act. KNX
Marca Gira
Categorías Dispositivos de bus KNX/Modbus
País de origen* DE
* El país de origen real puede variar según el lote de suministro. Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
Código del Sistema Armonizado 8542 3190 00
ETIM EC001581
Tipo de fijación DRA (adaptador para carril DIN)
Número de salidas 0
Sistema de bus KNX Sí
Con comunicación por bus No
Ancho en módulos 4

Detalles del embalaje

Nivel de embalaje 1 4010337018858

Otros datos técnicos

Sistema de bus inalámbrico No
Sistema de bus Powernet No
Sistema de bus LON No
Manejo local/manual Sí
Grado de protección (IP) IP20
Sistema de bus inalámbrico KNX No

Descripción

Control unit 1 - 10 V, 4-gang with manual actuation for KNX DRA plus Features: The controller unit switches and dims electrical devices that have a 1-10 V interface. Five device configurations can be selected. This leads to the assignment of four individually-controllable dimming channels to the switching outputs (e.g. four dimming channels are assigned to one switching relay to control a RGBW light). Relay outputs that are not associated with a dimming channel can be used as freely-acting switching actuator channel. Reactions in case of bus voltage failure and restoration can be set following an ETS programming process. Manual actution of outputs independent of the bus with mechanical switching position indication. Delay for actively transmitted feedback messages following bus voltage recovery. Logical linking function configurable per channel. Up to three central switching functions for the joint control of all dimming and switching channels. Switch-on times of the relay outputs can be recorded and evaluated by the elapsedoperating time meter. Group feedback of all switching conditions possible. Dimming channels: Four individually-controllable dimming channels. Feedback on switching condition and brightness value. Dimmable brightness range can be set. Dimming behaviour and dimming characteristics can be parameterised. Soft switch-on and soft switch-off function Block function or forced setting function can be parameterised. Time functions (switch-on delay, switch-off delay, staircase light function). With the staircase light function, the reaction at the end of the switch-on time can be configured. Inclusion of a dimming channel in up to ten scenes is possible. The burning-in function allows for the start-up of new fluorescent lamps prescribed by lighting manufacturers. Switching actuator operation (optional): Independent switching of switch outputs A2 to A4. NO contact or NC contact operation. Feedback from the switching condition. Block function or forced setting function can be parameterised. Time functions (switch-on, switch-off delay, staircase light function - also with advance warning function). Can be integrated in the light scenes. Up to ten internal scenes per switching output are programmable. Cyclical monitoring of incoming switching telegram is configurable. Notes : Electronic ballasts generate very high current spikes. For this reason, use a switch-on current limiter or a separate load contact for with greater loads.