Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
Connected single switch, base, 10 A, 71 x 71 mm, screw fixing, Zigbee® |
| Marca |
Niko
|
| Categorías |
Dispositivos de bus KNX/Modbus
|
| País de origen* |
CN |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 2010 00
|
| ETIM |
EC001097
|
| Sistema de bus KNX |
No |
| Con comunicación por bus |
No |
| Sistema de bus LON |
No |
| Sistema de bus inalámbrico KNX |
No |
| Radio bidireccional |
No |
Detalles del embalaje
| Nivel de embalaje 1 |
5413736368392 |
Otros datos técnicos
| Tipo de fijación |
Montaje empotrado (yeso) |
| Corriente nominal |
10 A |
| Potencia de salida |
2300 W |
| Tensión nominal de funcionamiento |
230 V |
| Sistema de bus inalámbrico |
No |
| Sistema de bus Powernet |
No |
| Corriente de conmutación máx. |
100 A |
| Otros sistemas de bus |
NHC |
| Apto para carga C |
No |
| Posibilidad de conectar fases diferentes |
No |
| Manejo local/manual |
Sí |
| Grado de protección (IP) |
IP20 |
| Con indicador LED |
Sí |
| Ampliable modularmente |
No |
| Módulo de bus desmontable |
No |
| Profundidad mín. de la caja empotrada |
40 mm |
Descargas
Descripción
The connected single Zigbee® switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected single switch to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. Please note that you cannot add a LED lighting unit to the conventional push button when you use it as an extension to Zigbee® connected devices. The connected single switch can switch its own contact. Once connected to the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, you can add the switch to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Nik