Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
CDS - single phase load-shedding contactor - 2 channels |
| Marca |
Schneider Electric
|
| Categorías |
Accesorios y piezas de montaje
|
| País de origen* |
FR |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8536 4900 00
|
| ETIM |
EC001655
|
| Tipo de fijación |
Carril DIN |
| Tipo de tensión |
AC |
| Tensión nominal |
230 V |
| Ancho en módulos |
5 |
| Corriente nominal Iu |
5-90 A |
| Número de contactos normalmente cerrados |
2 |
| Número de contactos normalmente abiertos |
0 |
| Número de contactos conmutados |
0 |
Detalles del embalaje
| Nivel de embalaje 1 |
3606480376863 |
| Nivel de embalaje 2 |
3606480376861 |
Otros datos técnicos
| Profundidad de montaje |
67 mm |
| Corriente de control simple |
5-90 A |
| Corriente nominal (contactos de control) |
1 A |
| Vida útil eléctrica (contactos de control) |
0 c (contacts) |
| Potencia de conmutación máx. (contactos de control) |
0 VA |
| Desconexión retardada máx. |
0 ms |
| Corriente continua máx. |
0 A |
| Número máx. de maniobras eléctricas |
0 c/h |
| Tensión de conmutación máx. (contactos de control) |
250 V |
| Vida útil mecánica (contactos de control) |
0 c (contacts) |
| Grado de protección (IP) |
IP20 |
Descargas
Descripción
This Acti9 CDS is single-phase load-shedder for 1 pole installation with 1 relay per phase. When the consumption exceeds the selected threshold, it temporarily cuts off the power supply to non-priority circuits. It increases the number of loads without modifying the installed power. The load-shedding and restoration in cascading configuration of 2 non-priority circuits via 2 relays with time-delayed action. This device reduces the installed power and prevents nuisance tripping of the upstream circuit breaker. The Iu Rated current is 5A to 90A. The Rated current (control contacts) is 1A. The Ui insulation voltage is 230VAC. The Ue operating voltage is 230VAC +/- 10%. The operating frequency is 50Hz or 60Hz. The power consumption is 12VA. The active power is 20kW maximum. The connection is done with rigid coper cables 10mm² to 50mm² or flexible or with ferrule copper cables 10mm² to 35mm². The dimensions are (W) 90mm x (H) 77mm x (D) 60mm. The width in 9mm pitches is 10. The weight is 300g. The degree of protection is IP20 and IP40 for a device in modular enclosure. The Operating temperature is -5°C to +50°C. The Storage temperature is -40°C to +70°C. It complies with NF C 61.750 and EN 500.81.1 standards.