Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
BPS-Ö Blister-Pack |
| Marca |
ELTAKO
|
| Categorías |
Interruptores
Mandos a distancia y receptores RF/IR
|
| País de origen* |
CN |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8526 9200 00
|
| ETIM |
EC000436
|
| Tipo de fijación |
Otros |
| Alimentación eléctrica |
230 V AC |
| Número de relés |
1 |
| Apto para pulsador de impulso |
Sí |
| Apto para regulador |
No |
| Tipo de fijación |
Otros |
Detalles del embalaje
| Nivel de embalaje 1 |
4010312314937, 4010312314937 |
| Nivel de embalaje 2 |
4010312314937 |
Otros datos técnicos
| Sin halógenos |
Sí |
| Protección de la superficie |
Otros |
| Apto para interruptor |
Sí |
| Apto para interruptor de persiana enrollable |
No |
| Calidad del material |
Termoplástico |
| Material |
Plástico |
| Sistema de código variable |
Sí |
| Número de comandos |
32 |
| Frecuencia de radio |
868 MHz |
| En carcasa |
Sí |
| En carcasa de base tubular |
No |
| Placa de circuito/módulo |
No |
| Funcionamiento momentáneo |
Sí |
| Funcionamiento conmutado |
Sí |
| Con transmisor de mano |
No |
| Con codificador por radio |
No |
| Con pulsador inalámbrico |
No |
| Apto para interruptor de persiana/lamas |
No |
| Apto para interruptor de persiana |
No |
| Transparente |
No |
| Apto para grado de protección (IP) |
IP20 |
| Compatible con IFTTT |
No |
| Compatible con Apple HomeKit |
No |
| Compatible con Google Assistant |
No |
| Compatible con Amazon Alexa |
No |
Descargas
Descripción
Blisterpack switching with wireless pushbutton FT55R alpin white and wireless actuator impulse switch with integrated relay function FSR61-230V. Smart Home sensor and Smart Home actuator. FT55: Wireless pushbutton for busch reflex or duro frame. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. Wireless pushbuttons with one rocker can transmit two evaluable signals: press rocker up and press rocker down. The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw mounting. FSR61-230V: Wireless actuator impulse switch with integrated relay function. 1 NO contact potential free 10A/250V AC, incandescent lamps up to 2000 watts, off delay with switch-off early warning and switchable pushbutton permanent light. Encrypted wireless, bidirectional wireless and repeater function are switchable. Only 0.8 watt standby loss. For installation. 45mm long, 45mm wide, 33mm deep. Supply voltage and control voltage locally 230V. If a power failure occurs, the switching state is retained. If a power failure occurs repeatedly, the device is switched off in a defined sequence. After installation, wait for short automatic synchronisation before the switched consumer is connected to the mains. In addition to the wireless control input via an internal antenna, this universal impulse switching relay can also be controlled locally by a conventional control switch if fitted previously. Glow lamp current is not permitted.