Información técnica
| Estado del artículo |
Nuevo |
| Nombre del fabricante |
BPB55-J62 Blister-Pack |
| Marca |
ELTAKO
|
| Categorías |
Interruptores
Mandos a distancia y receptores RF/IR
|
| País de origen* |
CN |
|
* El país de origen real puede variar según el lote de suministro.
Para confirmar el país de origen concreto, póngase en contacto con su gestor de cuenta.
|
| Código del Sistema Armonizado |
8526 9200 00
|
| ETIM |
EC000436
|
| Tipo de fijación |
Montaje empotrado (yeso) |
| Alimentación eléctrica |
230 V AC |
| Número de relés |
2 |
| Apto para pulsador de impulso |
Sí |
| Apto para regulador |
No |
| Tipo de fijación |
Otros |
Detalles del embalaje
| Nivel de embalaje 1 |
4010312324295, 4010312324295 |
Otros datos técnicos
| Color |
Azul |
| Sin halógenos |
Sí |
| Protección de la superficie |
Otros |
| Apto para interruptor |
Sí |
| Apto para interruptor de persiana enrollable |
Sí |
| Calidad del material |
Termoplástico |
| Material |
Plástico |
| Sistema de código variable |
Sí |
| Número de comandos |
32 |
| Frecuencia de radio |
868 MHz |
| En carcasa |
Sí |
| En carcasa de base tubular |
No |
| Placa de circuito/módulo |
No |
| Funcionamiento momentáneo |
Sí |
| Funcionamiento conmutado |
Sí |
| Con transmisor de mano |
No |
| Con codificador por radio |
No |
| Con pulsador inalámbrico |
No |
| Apto para interruptor de persiana/lamas |
Sí |
| Apto para interruptor de persiana |
Sí |
| Transparente |
No |
| Acabado superficial |
Mate |
| Apto para grado de protección (IP) |
IP20 |
| Compatible con IFTTT |
No |
| Compatible con Apple HomeKit |
No |
| Compatible con Google Assistant |
No |
| Compatible con Amazon Alexa |
No |
Descargas
Descripción
Blisterpack shading with wireless pushbutton F2T55E-wg and wireless shading element and roller shutter actuator FJ62NP-230V. Smart Home sensor and Smart Home actuator. F2T55E-wg: Wireless 2-way pushbutton in E-Design55, 80x80mm external dimensions, internal frame dimensions 55x55mm, 15mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. With rocker. Smart Home sensor. Wireless pushbuttons with one rocker can transmit two evaluable signals: press rocker up and press rocker down. The mounting base can be screwed onto a flat surface or glued to the wall, on glass or on furniture using the enclosed adhesive foil. Use the sleeves in the 55mm socket box for screw mounting. FJ62NP-230V: Wireless shading element and roller shutter actuator 1+1 NO contact, 4A/250V AC, not potential free, for a shading element motor 230V AC. Standby loss only 0.6 watt. For installation. 49x51mm wide, 20mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. The convenient tap technology permits the teach-in of up to 32 wireless universal pushbuttons, wireless direction pushbuttons and wireless central control pushbuttons. Zero passage switching. Bidirectional wireless switchable. Supply voltage, switching voltage and control voltage local 230V. If supply voltage fails, the device is switched off in defined mode. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally by a conventional control switch if fitted previously. Control is either by separate local control inputs for Up and Down as direction pushbuttons or these two inputs are bridged and controlled by single pushbuttons as universal pushbuttons. A change in direction then takes place by interrupting activation. An incandescent lamp current is not permitted.